V30-1225 Tower_840x520.jpg
StrippitTower03_840x520.jpg
StrippitTower04_840x520.jpg
StrippitTower06_840x520.jpg
StrippitTower13_840x520.jpg
V30-1225 Tower_840x520.jpg
StrippitTower03_840x520.jpg
StrippitTower04_840x520.jpg
StrippitTower06_840x520.jpg
StrippitTower13_840x520.jpg

Compact Tower (CT-P)

Space-saving material storage and retrieval

CT-P offers automated loading, unloading and storage of raw materials, sheet skeletons and finished parts in a compact tower unit. Combined with a high-performance Strippit punch press, it forms a productive manufacturing cell able to operate 24/7.

  • Sheet sizes: 49.2" x 98.4" and 60" x 120"
  • 6- or 10-pallet configuration
  • For Strippit PX, VX, V, M, and Strippit E

Highlights

High load and stack height capacity

CT-P handles a table load capacity of up to 6,600 pounds and a stack height capacity of 6.3", excluding pallet.

Loading bridge

The unit loads material thicknesses up to 0.157", provides automatic “plate on cups” detection, as well as empty stack detection for smooth, reliable operation. 

Peeling system

A peeling system consists of a peeling cylinder, separation magnet, air gun and copper brush to ensure single sheet loading.

Integrated carriage

An integrated carriage allows management of pallets holding up to three tons of material. The system offers single-side unloading of finished parts and detects material stack height during each unload cycle. 

Automatic zone selection

The system provides automatic zone selection depending on sheet size. All standard sheet formats are supported.

Easy-to-use controller

An integrated 19-inch touch screen controller is intuitive to use.

Factory installation or future retrofit 

This MOVit modular automation unit can be installed at the factory or added as a retrofit in the future.

Technical data

Options

Additional pallet

An additional pallet configurable as a load or unload pallet is offered. This extra pallet can be used to efficiently swap out a pallet of finished parts.