STRIPPIT PX 1530 WITH FA-P & CADMAN SUITE
Complex large projects
Groven+ is an expert in building façades for non-residential use: windows, domes and external cladding. Because of the size and especially the complexity of these projects, there’s a lot to consider. An average project covers approximately 4,000 m² in cladding, with peaks up to 35,000 m². An innovative project of which Groven+ is particularly proud is the Port House in Antwerp, designed by the famous architect Zaha Hadid. “These are projects with high architectural freedom, characterised by non-standard dimensions, shapes and colours. This is the type of project we want to focus on in the future,” says Jeroen Van De Putte, Production Manager, Sheet Metal. For such projects, you need a high- performing engineering and project management team. Based on the architect’s plans – often not even in 3D – the engineers create concepts, calculate stability, thermals and acoustics, and conduct feasibility studies. Project management monitors the project from there on. Groven+ produces their profiles and façade elements in-house and is responsible for installation and site monitoring.
Automated punching system
The production of components used to involve a lot of handling. The sheets were cut to the required size using guillotine shears, and were then punched and bent sheet by sheet. It was a time-consuming process, labour-intensive for our operators,
explains Van De Putte. Thanks to the installation of the LVD Strippit PX 1530 punch press with an Extended Tool Magazine (ETM) and Flexible Automation (FA-P) last year, there are now one-third fewer manual operations. The punch press is also linked to a warehouse with five towers, including 20 pallet positions per tower. The complete system runs on CADMAN® software.
As the level of automation increases, so does the amount of work preparation. It all begins with the import of the CAD-file into CADMAN-SDI. The files are then accessible for CADMAN-B and -P, LVD’s offline bending and punching software, to ensure that, in case of punching, the sequences, nestings and tool selection can be optimised. From there, the files are sent to the machine. When the operator starts a job, a signal is sent to the warehouse to pick up a pallet of sheets. FA-P loads the sheets and places the punched parts directly onto the correct pallet once the job is completed. Then they are either sent on pallets to the two press brakes or returned to the warehouse.
The Strippit PX single-head punch press has 20 indexable tool stations. Although Groven+ already had a wide range of options using multi-tools, they also decided on an ETM for 40 additional stations. Stefaan Martens, Sales Manager at LVD: “ETM optimises the tool selection before the job is started to ensure the PX has all the required tools. Tools not required by the machine are released, for example to be inspected for sharpness.”
No mass production
Groven+ is not engaged in mass production. The parts change for every new project. Isn’t it surprising then that Groven+ has chosen for far-reaching automation? Not according to Van de Putte: "Due to the scale of the projects, the nestings are sufficiently large. One nesting can be used for 100 sheets. It is always a mix of one-off pieces and parts of which large numbers are needed. This makes our system financially viable."
Martens adds: “Automation is no longer exclusively modelled on mass production. The software is designed to make automation practical for smaller batches. You should also remember the costs of manual handling. These can be quite substantial.”
The system has been in use for one year, so it is time for the first evaluation.
Van De Putte:
"Commissioning this type of system entails a steep learning curve. At the start, we processed 200 to 300 sheets monthly, but we’re now closer to 1000. That volume can certainly be increased, because for the time being, we are not running at night but that is the intention in the long term."
Pierre Comhaire, Punch Press Product Manager at LVD, adds: